SF6 Gas Switchgear 12kv 24kv 40.5kv BKRM6-12 10KV SF6 Gas Insulated Switchgear
Product Description
SF6 Gas Insulated Switchgear
SF6 Swichgear - BKRM6 12KV/24KV/35KV(GIS)
The SF6 gas insulated switchgear is suitable for middle voltage power distribution system with a rated voltage of 12kV. It could be used as RMUs in a power supply network, fault isolating switches and sectionalizing switches. If equipped with distribution automation devices (FTU/DTU) and communication devices, the SF6 insulated switchgear could communicate with the control center, measure the cable voltage, current, etc, and monitor the working status of switches.
BKRM6- 40.5 series of ring main unit is SF6 gas-insulated metal common tank enclosed switchgear, consisting of load break switch unit,load break switch fuse combination electrical unit, vacuum circuit breaker unit, and the incoming line unit of bus. It adopts a range ofadvanced technologies and materials, with excellent electrical and mechanical properties, less affected by environment and climate, in smallsize, easy to install easy to operate, with no need of maintenance, and can be flexibly combined. Its clear and intuitive design ensures simple and direct operation, the feeder's connection capacity is large, suitable for a variety of wiring systems.
Besides, we can replace the SF6 gas with nitrogen(N2 gas) that it will become a environmental friendly gas insulated switchgear. The green gas insulated switchgear safer and environmentally friendly more than SF6 GIS and it will replacing SF6 GIS in the future.
Features of SF6 Gas Insulated Switchgear
? The SF6 is the insulation material which is sealed in a stainless-steel enclosure, fully-insulated and maintenance-free.
? Long life endurance.
? Obvious watchable open contacts.
? Reliable interlock and safer operation.
Service Environment of SF6 Gas Insulated Switchgear
? Air temperature: Maximum temperature: +40℃; Minimum temperature:-25℃
? Humidity: Monthly average humidity 95%; Daily average humidity 90% .
? Altitude above sea level: Maximum installation altitude: 2500m
? Ambient air not apparently polluted by corrosive and flammable gas, vapor and etc.
? No frequent violent shake
Technical Parameters of SF6 Gas Insulated Switchgear
No | Item | Unit | C/F | CB module | |||||
Load break switch | Circuit breaker | ||||||||
1 | Rated voltage | kV | 12 | 24 | 36 | 12 | 24 | 36 | |
2 | Rated current | A | 630(200A/F) | 1250 | |||||
3 | Rated frequency | Hz | 50/60 | ||||||
4 | 1 min power frequency withstand voltage | kV | 45 | 55 | 80 | 45 | 55 | 80 | |
5 | Lightning impulse withstand voltage | kV | 75 | 125/150 | 170/195 | 75 | 125/150 | 170/195 | |
7 | Rated active load and close circuit breaking current | A | 630 | 1000 | |||||
8 | Rated cable charge breaking current | A | 50&10 | ||||||
9 | Rated short circuit breaking current | kA | / | 20 | 16 | 16/20 | |||
10 | Rated short circuit making current(peak) | kA | 63 | 50 | 40/50 | 63 | 50 | 40/50 | |
11 | Short time(2s) withstand current,load switch/earth | kA | 25/20 | 20/20 | 16/20 | 25/20 | 20/20 | 16/20 | |
12 | Rated withstand current(peak) | kA | 63 | 50 | 40/50 | 63 | 50 | 40/50 | |
13 | Mechanism life | Times | 3000 | 2000 | 10000 | 3000 | 5000 |
Applications of SF6 Gas Insulated Switchgear
SF6 gas insulated switchgear is widely applied in airport, power generation station, railway station, coal mine and etc..
Bokr Elec has rich experience in manufacture and supply of SF6 switchgear with gas insulated, vacuum circuit breaker and disconnector without maintenance, which greatly reduces maintenance and inspection workload. Contact us to get the best SF6 switchgear solution to your project.