What is the Indoor grounding switch (earthing) JN15-12-12KV

There shall have no conductive dust,no corrosive gasess,no severe vobaration and impact.no combustion and explosion on the site for switch operating.

JN15A-12/31.5 Indoor AC high voltage grounding switche use resin insulators, on which live parts, made of silver-plated electrolytic copper (99.9%), are placed. The blades are directly connected to the drive shaft. Contact elements are overdimensioned according to the requirements in order to guarantee, together with a high contact pressure between blades and contacts, a reduced ohmic resistance at the contact surface and a minimum metal wear-off during the life of the Grounding Switch, with the necessary robustness to withstand thermal and mechanical stresses under short-circuit conditions.

Environmental conditions

1. The altitude does not exceed 1000m;
2. Ambient air temperature: upper limit +40℃, lower limit -10℃;
3. Allow storage and transportation at 30℃;
4. The seismic intensity does not exceed 8 degrees;
5. No flammable, explosive, severe dust, chemical corrosion and severe vibration.

The main technical parameters